There are three main types of tires used in forklifts: pneumatic tires, pneumatic rim solid rubber tires, and press-fit solid tires.

Pneumatic tires are filled with compressed air, which has good elasticity and adhesion, and its performance is greatly affected by tire pressure. With the increase of tire pressure, its load-bearing capacity increases, but the adhesion ability decreases, the vibration frequency increases, and its comfort and safety Getting worse.

The difference between a solid tire with a pneumatic rim and a pneumatic tire is that the tire is not inflated but filled with highly elastic materials, so the puncture resistance and abrasion resistance are enhanced, the load-bearing capacity is greatly enhanced, and the working safety of the vehicle is increased.

The press-fit solid tire has a small diameter and strong pressure bearing capacity. It is suitable for forklifts with large loads and small wheels. It has no puncture risk and is easy to maintain.

Solid tires have good high temperature resistance and low heat generation, so that the tires still have good safety in harsh environments. Low compression deformation, high recovery ability, tires maintain good operating performance under high load conditions. It has low heat generation and is composed of cutting-resistant materials. It still has an excellent load under long distances and long hours of work. ability.

Solid tires can be used in extremely harsh workplaces, such as mines, ports, glass factories, and metallurgical industries.

There are some cheap low-quality solid tires on the market. The tires are filled with scrap tires or other substances. Only about 8CM on the surface is synthetic rubber. Such low-cost solid tires often have quality problems and are very easy to puncture. , Or degumming due to heat.

ShangHai Decadura Tyre Co., Ltd. has provided high-quality forklift solid tires to the global market for more than ten years. If necessary, please contact Info@Decadura.com.