Solid Tires For Your Equipment

Product ID:ATNZBA708

The ATNZBA708 tire is designed for Telescopic Boom Lifts and Articulating Boom Lifts, offering high load capacity and excellent stability. Its tread pattern excels in slip resistance and adaptability to various terrains.

We also offer a Cured-on version to enhance load capacity and safety. Additionally, eco-friendly colored solid tires are available to meet the cleanliness requirements for indoor operations.

Non-marking(Eco-friendly colored) Version of the ATNZBA708 are also available.

Product ID:AEUZGS706

Our aerial work platform tires are suitable for equipment such as Scissor Lifts, Telescopic Boom Lifts, and Articulating Boom Lifts.

The DecaDura brand is renowned for the safety of its aerial work platform tires. Through an innovative process, the rubber is permanently vulcanized to the rim, offering excellent puncture resistance, grip, and slip resistance. These tires are burst-proof, support prolonged continuous use, and are maintenance-free for life.

Compatible with brands including Genie, JLG, Skyjack, Haulotte, Dingli, XCMG, Sany, Zoomlion, LGMG/Manitou, Teupen, Terex, Snorkel, MEC, Cela, Runshare, and Goman.

We offer Cured-on version tires for Scissor Lifts, characterized by high safety and stability. Typically made from eco-friendly rubber in gray or white to avoid leaving marks on surfaces, we can also provide tires in other colors upon request.

Product ID:AEUZBA707

Our aerial work platform tires are suitable for equipment such as Scissor Lifts, Telescopic Boom Lifts, and Articulating Boom Lifts.

The DecaDura brand is renowned for the safety of its aerial work platform tires. Through an innovative process, the rubber is permanently vulcanized to the rim, offering excellent puncture resistance, grip, and slip resistance. These tires are burst-proof, support prolonged continuous use, and are maintenance-free for life.

Compatible with brands including Genie, JLG, Skyjack, Haulotte, Dingli, XCMG, Sany, Zoomlion, LGMG/Manitou, Teupen, Terex, Snorkel, MEC, Cela, Runshare, and Goman.

We offer Cured-on version tires for Scissor Lifts, characterized by high safety and stability. Typically made from eco-friendly rubber in gray or white to avoid leaving marks on surfaces, we can also provide tires in other colors upon request.

Product ID:AEUZGA712

Our aerial work platform tires are suitable for equipment such as Scissor Lifts, Telescopic Boom Lifts, and Articulating Boom Lifts.

The DecaDura brand is renowned for the safety of its aerial work platform tires. Through an innovative process, the rubber is permanently vulcanized to the rim, offering excellent puncture resistance, grip, and slip resistance. These tires are burst-proof, support prolonged continuous use, and are maintenance-free for life.

Compatible with brands including Genie, JLG, Skyjack, Haulotte, Dingli, XCMG, Sany, Zoomlion, LGMG/Manitou, Teupen, Terex, Snorkel, MEC, Cela, Runshare, and Goman.

We offer Cured-on version tires for Scissor Lifts, characterized by high safety and stability. Typically made from eco-friendly rubber in gray or white to avoid leaving marks on surfaces, we can also provide tires in other colors upon request.

Product ID:AEUZGA713

Our aerial work platform tires are suitable for equipment such as Scissor Lifts, Telescopic Boom Lifts, and Articulating Boom Lifts.

The DecaDura brand is renowned for the safety of its aerial work platform tires. Through an innovative process, the rubber is permanently vulcanized to the rim, offering excellent puncture resistance, grip, and slip resistance. These tires are burst-proof, support prolonged continuous use, and are maintenance-free for life.

Compatible with brands including Genie, JLG, Skyjack, Haulotte, Dingli, XCMG, Sany, Zoomlion, LGMG/Manitou, Teupen, Terex, Snorkel, MEC, Cela, Runshare, and Goman.

We offer Cured-on version tires for Scissor Lifts, characterized by high safety and stability. Typically made from eco-friendly rubber in gray or white to avoid leaving marks on surfaces, we can also provide tires in other colors upon request.

Product ID:CSNZBA701

In manufacturing processes, the use of solid tires as a key component of material handling equipment is primarily due to their durability, low maintenance costs, and high load-bearing capacity, which enhance production efficiency and reduce long-term operational costs.

The CSNZBA701 is specifically designed for transporting and moving items of general weight, offering a variety of tire sizes known for their excellent stability and grip. For heavier load requirements, the Cured-on versions of solid tires represent a smart choice.

Customization of tires and mounts is available upon request.

Product ID:LMUZBA706

The Cured-on Solid Tire is the preferred choice for production line transfer systems due to its robust structure and high load capacity.

The LMUZBA706 is utilized in sintering machines. Its iron core is manufactured according to the assembly specifications of the machine, with the thickness and structure of the rubber being adjustable based on the tire load. The tight integration between the two components after vulcanization results in minimal deformation, enhanced stability, and safety, allowing for a load increase of over 15% compared to tires of the same size.

We supply Split rims and Flat-bottomed rims tailored for solid tires.

Split rims are two-piece sets that are fitted into solid tires using a Rim Disassembling Machine and then bolted onto the vehicle. They are cost-effective and primarily used with solid tires smaller than 15 inches.

Flat-bottomed rims come in one, two, or three-piece sets, with four or five-piece versions being quite rare. Known for their excellent safety, stability, and balance, they are typically employed with large solid tires over 15 inches. The rim body is inserted into the solid tire using a Rim Disassembling Machine, followed by the attachment of side rings and locking rings.

We possess significant expertise in rim fitting sizes and in providing rims that are resistant to salt and corrosion. We offer customization for rims of various sizes and surface finishes. In fact, if you have access to a Rim Disassembling Machine, we encourage the reuse of old rims and their matching bolts for environmental reasons and to ensure compatibility with vehicles.

Our offering of the Solid Tire Rim Disassembling Machine is aimed at assisting our distributors or potential distributors in expanding their tire business.

With nearly two decades of experience in the solid tire industry, we possess a deep and comprehensive understanding of the various Solid Tire Rim Disassembling Machines & Accessories available in the Chinese market. We are confident that the machines and the complete set of installation fixtures we recommend and provide represent the best value for money and are ideally suited for solid tire distributors.

Product ID:GRUZBS700

The GRNZBS700 solid tire for passenger boarding bridge is a cost-effective solution designed to replace existing pneumatic tires. Compared to pneumatic tires, its Cured-on structure and solid rubber material offer superior safety, maintenance-free operation, and load capacity. 

The GRNZBS700 significantly reduces procurement and maintenance costs. For the most commonly used size of 40x16x30 inches, it boasts a lifespan that is more than three times longer than pneumatic tires, with an average operational life of about ten years under normal use.

Product ID:PCNZBA711

All DecaDura port series solid tires feature a three-layer rubber structure. The base layer's robustness significantly enhances, ensuring a tight bond between the tire and the rim. Tailored for the unique demands of port environments, our specialized high-performance tread rubber delivers excellent grip, even in wet and slippery conditions, and offers outstanding wear resistance. A high-performance rubber compound that slows down temperature increase supports the impressive continuous operational capability of DecaDura tires.

The PCNZBA711, designed for Reach Stackers, provides exceptional stability and load capacity, showcasing notable puncture resistance and tear resistance.

Product ID:FRPERZC101

Polyurethane forklift wheels have many advantages, including wear resistance, oil resistance, solvent resistance, higher load-bearing capacity, excellent tear resistance, excellent weather resistance, excellent noise reduction performance, extremely high bending life, excellent electrical insulation performance, and excellent heat and cold resistance.

For over fifteen years, DecaDura has been providing polyurethane tires for forklifts, with a deep understanding of the specifications required for the Linde series of forklifts and the critical role these tires play in the overall operation and performance of the machinery.

Our production uses premium polyurethane to create tires with exceptional mechanical performance, including excellent dynamic load capacity, high rebound, superior mechanical wear resistance, and high durability. These characteristics ensure that our tires perfectly enhance the performance of Linde forklifts, maintaining safety and stability during rapid operations and enabling precise vehicle control.

We offer polyurethane tires suitable for the following Linde vehicles:

Linde Pallet Truck: T33R, T16L, M25, M25 Scale, MT15, T16, T18, T20, T30, M 10X, T14S, T20R

Linde Pallet Stackers: L12R, L16R, L12AP, L14AP, L16AP, L20AP, L10AS, L12S, D12, D14, D12HP, D12S, L10B, and V08

Linde reach trucks: R25F, R20F, R10-R25, R10B, R12B, R14B, R16B, R14G, R16G, R20G, R14X, R16X, R17X .

Linde order pickers: V10, V24V, V48V, N20L, N20Li, N20, N20HP, N20HP ION, N24HP, V08, N20 VI

Linde logistic trains: FT16C, FT20C, FT08C, FT10C, FT16C, FT20C

Polyurethane tires will come with secure packaging upon delivery to avoid any damage during transit.

The table below showcases a selection of our polyurethane tire models for Linde forklifts. For more detailed information on additional models, please reach out to us.